[cisco-voip] did/fxs config help

[Craig Staffin]

Moataz,
Not always true the FXS ports are actually used for analog DID trunks.

As far as the problem do you have dial peers on the router?  You will need
both an inacoming dial peer and outgoing OR  a phone with that DN on it

THe incoming must have incoming-called-number . (or some form of the number)

Craig

On Wed, Jul 23, 2008 at 4:43 AM, Moataz Mamdouh <moataz_mmdh at yahoo.com>
wrote:

> u call from FXS!!!!
> --- On *Tue, 7/22/08, Dan Letkeman <danletkeman at gmail.com>* wrote:
>
> From: Dan Letkeman <danletkeman at gmail.com>
> Subject: [cisco-voip] did/fxs config help
> To: cisco-voip at puck.nether.net
> Date: Tuesday, July 22, 2008, 9:51 PM
>
> Hello,
>
> I'm trying to setup a couple of did lines into a cme router.
> Currently the voice ports look like this:
>
> voice-port 0/1/1
>  signal did wink-start
>  input gain 4
>
> and I have setup the num-exp commands:
>
> num-exp 2346 1002
> num-exp 2341 1011
> num-exp 2347 1020
>
> I'm guessing I need a dial-peer?
>
> When I call the number 5552340 all I get is a busy signal.
>
> Where should I go from
>  here?
>
> Thanks,
> Dan.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Craig Staffin
Craig at staffin.org
(H) 262-437-7313
(C) 262-613-6003
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080723/19b9db59/attachment.html>