[cisco-voip] did/fxs config help

[Moataz Mamdouh]

u call from FXS!!!!
--- On Tue, 7/22/08, Dan Letkeman <danletkeman at gmail.com> wrote:
From: Dan Letkeman <danletkeman at gmail.com>
Subject: [cisco-voip] did/fxs config help
To: cisco-voip at puck.nether.net
Date: Tuesday, July 22, 2008, 9:51 PM

Hello,

I'm trying to setup a couple of did lines into a cme router.
Currently the voice ports look like this:

voice-port 0/1/1
 signal did wink-start
 input gain 4

and I have setup the num-exp commands:

num-exp 2346 1002
num-exp 2341 1011
num-exp 2347 1020

I'm guessing I need a dial-peer?

When I call the number 5552340 all I get is a busy signal.

Where should I go from here?

Thanks,
Dan.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080723/58f1ca63/attachment.html>