[cisco-voip] Multicasting MOH on 3560

[Jonathan Charles]

ip multicast-routing
ip igmp enable

and on the vlan interface:
ip pim sparse-dense mode




Jonathan

On Wed, Jul 23, 2008 at 2:55 AM, John Botha - I.T
<JohnB at jhb.mustek.co.za> wrote:
> Hi All
>
> I am having trouble running my music on hold at one of my branches offices
> the branches is to small to install a core switch so I use a Catalyst 3560
> switch 24 port the call manager is in HQ and I have a 2800 voice gateway and
> a Cisco 1800 route connected to HQ
>
> I can receive calls over the wan and the pstn but at the the one office  the
> MOH is not working
>
> I have ip pim dense mode configured at all the other offices under the int
> vlan but those are layer 3 switches and its working fine
>
> any ideas how to get that working on a layer 2 switch
>
> Regards,
> John
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>