[cisco-voip] CME MoH live feed

[Jonathan Charles]

Your outcall cmd on the ephone-dn is wrong... you need the following:

Here's my working one:


ephone-dn  55
 number 1 no-reg primary
 moh ip 239.12.13.1 port 2000 out-call 8888




Jonathan

On Wed, Jul 23, 2008 at 12:46 PM, Joe Cisco <smetsysocsic at gmail.com> wrote:
> 12.4(15)XZ.
>
> This is an FXO card.
> !
> voice-port 0/2/0
>  signal loopStart live-feed
>  input gain 2
>  description To MoH Live Feed
> !
> !
> dial-peer voice 2000 pots
>  destination-pattern 8888
>  port 0/2/0
> !
> !
> telephony-service
> .
> .
>  moh music-on-hold.au
>  multicast moh 239.12.13.1 port 2000
> .
> .
> !
> !
> ephone-dn  55
>  number 1
>  moh out-call 8888
> !
>
> Your time is appreciated.
>
> Thanks,
>
> Joe C.
>
> On Wed, Jul 23, 2008 at 12:24 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>> We deployed 100 sites with FXO live-feed.... what IOS are you running,
>> and paste your MoH-relevant config (ephone-dn, ephone,
>> telephony-service and voice port...)
>>
>>
>>
>> Jonathan
>>
>> On Wed, Jul 23, 2008 at 11:53 AM, Joe Cisco <smetsysocsic at gmail.com> wrote:
>>> I've followed cco's procedure for setting up a live feed for MoH on
>>> CME. Every several seconds I see the FXO port light up for about a
>>> second, but that is it. However, MoH is not working.
>>>
>>> Anyone else successfully gotten this to work?
>>>
>>> Thanks,
>>>
>>> Joe C.
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
>