[cisco-voip] CME MoH live feed

[Joe Cisco]

Tried that.  But still had no luck. I did a shut/no shut on the port
and it started working. However I don't think it would have started
working if you hadn't gotten me straightened out.

THANKS FOR THE HELP!

-Joe C.

On Wed, Jul 23, 2008 at 12:53 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> Your outcall cmd on the ephone-dn is wrong... you need the following:
>
> Here's my working one:
>
>
> ephone-dn  55
>  number 1 no-reg primary
>  moh ip 239.12.13.1 port 2000 out-call 8888
>
>
>
>
> Jonathan
>
> On Wed, Jul 23, 2008 at 12:46 PM, Joe Cisco <smetsysocsic at gmail.com> wrote:
>> 12.4(15)XZ.
>>
>> This is an FXO card.
>> !
>> voice-port 0/2/0
>>  signal loopStart live-feed
>>  input gain 2
>>  description To MoH Live Feed
>> !
>> !
>> dial-peer voice 2000 pots
>>  destination-pattern 8888
>>  port 0/2/0
>> !
>> !
>> telephony-service
>> .
>> .
>>  moh music-on-hold.au
>>  multicast moh 239.12.13.1 port 2000
>> .
>> .
>> !
>> !
>> ephone-dn  55
>>  number 1
>>  moh out-call 8888
>> !
>>
>> Your time is appreciated.
>>
>> Thanks,
>>
>> Joe C.
>>
>> On Wed, Jul 23, 2008 at 12:24 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>>> We deployed 100 sites with FXO live-feed.... what IOS are you running,
>>> and paste your MoH-relevant config (ephone-dn, ephone,
>>> telephony-service and voice port...)
>>>
>>>
>>>
>>> Jonathan
>>>
>>> On Wed, Jul 23, 2008 at 11:53 AM, Joe Cisco <smetsysocsic at gmail.com> wrote:
>>>> I've followed cco's procedure for setting up a live feed for MoH on
>>>> CME. Every several seconds I see the FXO port light up for about a
>>>> second, but that is it. However, MoH is not working.
>>>>
>>>> Anyone else successfully gotten this to work?
>>>>
>>>> Thanks,
>>>>
>>>> Joe C.
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>
>>
>