[cisco-voip] CM 4.2(3) to 6.1(2) upgrade

[Chris Ward (chrward)]

Actually, the LDAP integration in the Linux CUCMs is quite easy when
compared to the old Windows integration. I believe DMA will copy all the
users out of LDAP and drop them into the DB in 6.X. After that, you will
need to go and configure the LDAP integration under "System - LDAP -
System|Directory|Authentication". Once you configure the sync, your LDAP
integration should be set.

 

This is relatively painless. Also, you only need to setup the LDAP
Authentication portion if you want the users to use their AD creds to
login into ccmuser. All the application users will be stored in the DB
via the "Application Users" section.

 

Please let me know if you have any questions. Thanks Bill.

 

Chris Ward 

Cisco Systems Inc. 

Customer Support Engineer

Unified Communication Infrastructure

Boxborough, MA 

9:00am - 6:00pm Eastern 

978-936-0217

chrward at cisco.com

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Wednesday, July 23, 2008 5:01 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CM 4.2(3) to 6.1(2) upgrade

 

I'm getting ready for a 4.2(3) to 6.1(2) upgrade. The CM 4.2 is AD
integrated. I don't see anything in the procedures dealing with AD
integration.

 

How bad is this going to be???

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080723/20af8866/attachment.html>