[cisco-voip] CCM and FXO on 2801

[Mark J]

Hey guys,

I'm having an issues getting the FXO ports (outbound calls) working
successfully working on 2811 thru CCM.

I have inbound calls working fine, just can't get outbound calls working,
output tone is like a busy signal.

Does anyone have a config that is working so that I can compare my config?

Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080724/3f923a38/attachment.html>