[cisco-voip] CCM and FXO on 2801

[Joe Cisco]

Are you using MGCP or H323?

-Joe C.

On Wed, Jul 23, 2008 at 10:07 PM, Mark J <markju at gmail.com> wrote:
> Hey guys,
>
> I'm having an issues getting the FXO ports (outbound calls) working
> successfully working on 2811 thru CCM.
>
> I have inbound calls working fine, just can't get outbound calls working,
> output tone is like a busy signal.
>
> Does anyone have a config that is working so that I can compare my config?
>
> Thanks.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>