[cisco-voip] CCM and FXO on 2801

[Mark J]

Thanks for prompt reply...

Using MGCP

Thanks

2008/7/24 Joe Cisco <smetsysocsic at gmail.com>:

> Are you using MGCP or H323?
>
> -Joe C.
>
> On Wed, Jul 23, 2008 at 10:07 PM, Mark J <markju at gmail.com> wrote:
> > Hey guys,
> >
> > I'm having an issues getting the FXO ports (outbound calls) working
> > successfully working on 2811 thru CCM.
> >
> > I have inbound calls working fine, just can't get outbound calls working,
> > output tone is like a busy signal.
> >
> > Does anyone have a config that is working so that I can compare my
> config?
> >
> > Thanks.
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080724/fcd524e8/attachment.html>