[cisco-voip] incoming call ring?

[Bill Talley]

You should be able to resolve that by going under the ephone-dn and
adding the command call-waiting ring.  This assumes it's a dual line dn
and call-waiting is currently beeping or flashing on the dn.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dan Letkeman
Sent: Thursday, July 24, 2008 4:19 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] incoming call ring?

On CME, when a second call comes in the phone does not ring.  Is there a
way to make it ring on all incoming calls?

Dan.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



CONFIDENTIALITY NOTICE: This electronic mail transmission (including any accompanying attachments) is intended solely for its authorized recipient(s), and may contain confidential and/or legally privileged information. If you are not an intended recipient, or responsible for delivering some or all of this transmission to an intended recipient, be aware that any review, copying, printing, distribution, use or disclosure of the contents of this message is strictly prohibited. If you have received this electronic mail message in error, please delete it from your system without copying it, and contact sender immediately by Reply e-mail, or by calling 913-307-2300, so that our address records can be corrected.

Although this e-mail and any attachments are believed to be free of any virus or other defect that might negatively affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way in the event that such a virus or defect exists.