[cisco-voip] BAT Problem

[Adam]

I was trying to use BAT to load up a bunch of Call Pickup Groups on CUCM
6.1(2) system and ran into a not-so-slight issue. There were about five
groups that had an invalid character (& or /) in the group name and those
errored out during the BAT import. This wouldn't be an issue, except that it
appears that BAT "half" imported them. If I search for them under Call
Pickup Groups they don't show up, however they're hidden in the dial plan
somewhere. If I try and do a route plan report it gives an "unmapped
exception null" error and shows nothing. The strangest part is if I click on
the view in file button it exports a CSV file and they show up there as call
pickup groups. I'm going to open a TAC case tomorrow once I get back on site
as I cannot get the server serial number (a different CUCM 6.x bug!). I
figured I would post here to see if anyone had come across this, or had any
ideas to try.

Thanks,
Adam
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080729/aad22a90/attachment.html>