[cisco-voip] 2port mft data and voice

[James Buchanan]

And that port should be the PRI--it's not so tolerant of clock slips.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kris Seraphine
Sent: Wednesday, July 30, 2008 9:51 AM
To: Voice Noob
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 2port mft data and voice

If the voice and data providers are different you will likely run into
clocking issues.  You will have to designate one of the ports as the
primary clock source (using the network-clock-select command) and this
will provide clocking to both ports.

On Wed, Jul 30, 2008 at 8:22 AM, Voice Noob <voicenoob at gmail.com> wrote:
> Can I use a 2port MFT card and bring a voice PRI in on one port and a
data
> T1 on the other port?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
kris seraphine
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip