[cisco-voip] 2port mft data and voice

[Jonathan Charles]

Don't do it.

You will see slips on whichever port is not the clocking primary.

A PRI gets its clocking from the ISDN switch. A PTP T1 gets its
clocking from the remote router; a FR T1 gets its clocking from the
frame switch....

I have seen this dozens of times and always there are slips.

Now, the question is, do these slips matter, well, they can...

It is a gamble.


Jonathan

On Wed, Jul 30, 2008 at 8:22 AM, Voice Noob <voicenoob at gmail.com> wrote:
> Can I use a 2port MFT card and bring a voice PRI in on one port and a data
> T1 on the other port?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>