[cisco-voip] Unity Connection with the Phone View feature

Wed Jul 30 17:45:52 EDT 2008

I was reading the Admin guides for CUC and it clearly states "Phone View" as an installable feature.  What I want is the phone to display a message when diverting to VM to tell me I can monitor the voice message (real time) of a caller, and recover it if necessary.

Is this not possible in CUC?

All the best

Mike Hawley

From: pat at wcyv.com [mailto:pat at wcyv.com] On Behalf Of Pat Hayes
Sent: Wednesday, 30 July 2008 11:49 PM
To: Mike Hawley (AU)
Cc: Wilusz, Mike; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity Connection with the Phone View feature

PhoneView refers to a few different features, including message locater and message monitor which one are you trying to get to work? It sounds like message monitor, which according to this feature comparison, is in Unity only at the moment, not UC:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps2237/product_data_sheet0900aecd806bfc37_ps6509_Products_Data_Sheet.html

UC does have message locater, though, but that comes in to play when browsing your messages while signed in.

On Wed, Jul 30, 2008 at 1:09 AM, Mike Hawley (AU) <Mike.Hawley at didata.com.au<mailto:Mike.Hawley at didata.com.au>> wrote:

Hi, did you guys resolve this as I am not seeing the phoneview prompt on my phone when call gets delivered to VM.  I am using 7962G which is the newer release of 7961G so it should work, even thought not listed...?

I have followed all the recommendations set below and it still does not work...

One other thing - do you know if it works for Extension Mobility users?

All the best

Mike

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Wilusz, Mike
Sent: Monday, 19 May 2008 2:21 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Unity Connection with the Phone View feature

Dave,

I have a very similar install running (same versions).  I have it working on 7961Gs as well.  Make sure that you have the "PhoneView" application user set up on the Communications Manager and that the credentials match between CUCM and Unity Connection.  If these match, you also have to make sure that the "PhoneView" user on CUCM has all the required handsets set as Controlled Devices.  Besides that, the only other setup is on Unity Connection, where under each user you have to enable Phone View (or set it up under the CoS).  On a per-user basis, you set this up under the user -> Edit -> Phone Menu.  You should see an option to Enable Phone View.

When I had the same issue as you it was because I had not set the phones as controlled devices under my "PhoneView" application user on CUCM.  But, any of the above may cause this.

Hope this helps!

Mike Wilusz, CCNA

Networking Systems Programmer

Price Chopper Supermarkets / The Golub Corporation

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of dschulz
Sent: Sunday, May 18, 2008 9:07 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Unity Connection with the Phone View feature

Hi Group -

Has anyone had success to get Phone View to work with Unity Connection?  I am using UC version 2.0(1) with CallManager 6.1.  Everything appears to work up to the point where it states, "Searching......there was a problem displaying messages on your phone, please contact your system administrator".  I am using a 7961G, which the documentation states that this is a supported phone.  Is there a special load needed?  Any help is appreciated.

Dave

******************************************************************************

- NOTICE FROM DIMENSION DATA AUSTRALIA

This message is confidential, and may contain proprietary or legally privileged information. If you have received this email in error, please notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any attachments for viruses. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.

******************************************************************************

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080731/9757edd5/attachment.html>