[cisco-voip] Displayed zeros on 7940/60 phones

[Lelio Fulgenzi]

hmmm, some would say the slash in the zero is correct! ;)

i've got 7.2(4.0) and we've got slashes.....

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

----- Original Message ----- 
From: "Matthew Melbourne" <matt at melbourne.org.uk>
To: <cisco-voip at puck.nether.net>
Sent: Monday, March 03, 2008 3:13 PM
Subject: [cisco-voip] Displayed zeros on 7940/60 phones


>I recently upgraded a 7940 to 8.0(8) from 7.3(2), and have since
> downgraded it again and have noticed that any zeros (e.g. in the time,
> date, DN etc) have a line through them, whereas before they didn't.
>
> The firmware is back to the same version, and I've factory reset the phone
> and deleted it and added it back into CallManager. Other phones which have
> stayed at 7.3(2) are unaffected and display zeros correctly.
>
> Cheers,
>
> Matt
>
> -- 
> Matthew Melbourne
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>