[cisco-voip] Unblocking Call Blocking

[Kelemen Zoltan]

Why not just use a separate route pattern for *82 as well?

regards,
  Zoltan

Todd Franklin wrote:
> Well we use *67 here at a Police Station to block outgoing Caller ID, 
> so people don't know it's the Police Station calling.
> Yesterday, they called a number that does not accept Private Calls.  
> Usually you would press *82 to enable the Caller ID to go out.
> But the CCM responded with "Your call cannot be completed as dialed".
>
> The Route pattern in CCM looks thusly:
>
> 9.*67[2-9]XXXXXX
>
> I need to leave that route pattern intact, but I also need them to 
> selectively enable Caller ID to go out.  Is this doable??
>
> Thank you everyone!
>
> Todd
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>