[cisco-voip] Unblocking Call Blocking

[Todd Franklin]

It's H323.  This is POTS.

On Mon, Mar 3, 2008 at 5:20 PM, Scott Voll <svoll.voip at gmail.com> wrote:

> what kind of VGW?  I'm using a H323 and I have a route pattern of 9. that
> passes the caller ID, but I have one that is set to 3. and it blocks caller
> ID.  maybe a way to do it.  Is this a PRI or POTS?
>
> Scott
>
> On Mon, Mar 3, 2008 at 11:12 AM, Todd Franklin <toddnh65 at gmail.com> wrote:
>
> > Well we use *67 here at a Police Station to block outgoing Caller ID, so
> > people don't know it's the Police Station calling.
> > Yesterday, they called a number that does not accept Private Calls.
> > Usually you would press *82 to enable the Caller ID to go out.
> > But the CCM responded with "Your call cannot be completed as dialed".
> >
> > The Route pattern in CCM looks thusly:
> >
> > 9.*67[2-9]XXXXXX
> >
> > I need to leave that route pattern intact, but I also need them to
> > selectively enable Caller ID to go out.  Is this doable??
> >
> > Thank you everyone!
> >
> > Todd
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080303/32186568/attachment.html