[cisco-voip] Unblocking Call Blocking

[Scott Voll]

what kind of VGW?  I'm using a H323 and I have a route pattern of 9. that
passes the caller ID, but I have one that is set to 3. and it blocks caller
ID.  maybe a way to do it.  Is this a PRI or POTS?

Scott

On Mon, Mar 3, 2008 at 11:12 AM, Todd Franklin <toddnh65 at gmail.com> wrote:

> Well we use *67 here at a Police Station to block outgoing Caller ID, so
> people don't know it's the Police Station calling.
> Yesterday, they called a number that does not accept Private Calls.
> Usually you would press *82 to enable the Caller ID to go out.
> But the CCM responded with "Your call cannot be completed as dialed".
>
> The Route pattern in CCM looks thusly:
>
> 9.*67[2-9]XXXXXX
>
> I need to leave that route pattern intact, but I also need them to
> selectively enable Caller ID to go out.  Is this doable??
>
> Thank you everyone!
>
> Todd
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080303/8139f2ec/attachment.html