[cisco-voip] help: 3825 as MGCP G/W with VIC-2MFT-E1

[Syed Khalid Ali]

Thanks for the reply. But why should I select the network module since the 
E1 is not installed in NM-module slot... it is in HWIC slot.

regards,

khalid



----- Original Message ----- 
From: "Kelemen Zoltan" <keli at carocomp.ro>
To: "Syed Khalid Ali" <Khalid_Khursheed at hotmail.com>
Cc: <cisco-voip at puck.nether.net>
Sent: Monday, March 10, 2008 12:37 PM
Subject: Re: [cisco-voip] help: 3825 as MGCP G/W with VIC-2MFT-E1


| Hi Khalid,
|
| choose the network module first, then you will have different options
| for its slots.
|
| regards,
|  Zoltan
|
| Syed Khalid Ali wrote:
| > Hi
| >
| > I am trying to register an MGCP gateway with CCM 4.2
| > H/W is 3825 with 2 x VIC-2MFT-E1 but CCM show option only for the
| > network module.
| >
| > regards,
| >
| > khalid
| > ------------------------------------------------------------------------
| >
| > _______________________________________________
| > cisco-voip mailing list
| > cisco-voip at puck.nether.net
| > https://puck.nether.net/mailman/listinfo/cisco-voip
| >
|
|