[cisco-voip] help: 3825 as MGCP G/W with VIC-2MFT-E1

[Kelemen Zoltan]

Ask Cisco ;)

There is a NM in "Slot 0" called: NM-4VWIC-MBRD where the "MBRD" part I 
suppose refers to "motherboard" (It's just a wild guess but whatever)

Selecting that module for Slot 0 will give you access to VIC/VWIC/etc. 
choices in the NM's subunits. Actually you can't select anything else 
for Slot 0 anyway

Consider the HWIC slot as a subunit of the built-in NM.

regards,
  Zoltan


Syed Khalid Ali wrote:
> Thanks for the reply. But why should I select the network module since the 
> E1 is not installed in NM-module slot... it is in HWIC slot.
>
> regards,
> 4VWIC
> khalid
>
>
>
> ----- Original Message ----- 
> From: "Kelemen Zoltan" <keli at carocomp.ro>
> To: "Syed Khalid Ali" <Khalid_Khursheed at hotmail.com>
> Cc: <cisco-voip at puck.nether.net>
> Sent: Monday, March 10, 2008 12:37 PM
> Subject: Re: [cisco-voip] help: 3825 as MGCP G/W with VIC-2MFT-E1
>
>
> | Hi Khalid,
> |
> | choose the network module first, then you will have different options
> | for its slots.
> |
> | regards,
> |  Zoltan
> |
> | Syed Khalid Ali wrote:
> | > Hi
> | >
> | > I am trying to register an MGCP gateway with CCM 4.2
> | > H/W is 3825 with 2 x VIC-2MFT-E1 but CCM show option only for the
> | > network module.
> | >
> | > regards,
> | >
> | > khalid
> | > ------------------------------------------------------------------------
> | >
> | > _______________________________________________
> | > cisco-voip mailing list
> | > cisco-voip at puck.nether.net
> | > https://puck.nether.net/mailman/listinfo/cisco-voip
> | >
> |
> | 
>
>