[cisco-voip] Cisco Fax Server/ Resource Unavailable / MGCP H323

"Gregor Weißenfels" gweissenfels at gmx.de
Tue Mar 11 03:30:25 EDT 2008


Hi Kalle,

regarding the MGCP configuration check my previous email. I don´t think that you can use ATA´s and FaxServer coexistent on one gateway. You would have to configure two faxprotocols. Fax passthrough and T.38. I don´t think that it is possible. Someone please correct me, if i´m wrong.
The new VG´s (VG202?), replacing the ATA, will support T.38.

regards,
Gregor

-------- Original-Nachricht --------
> Datum: Tue, 11 Mar 2008 07:48:28 +0100
> Von: Kalle Tetto <tettokalle at hotmail.com>
> An: cisco-voip at puck.nether.net
> Betreff: Re: [cisco-voip] Cisco Fax Server/ Resource Unavailable / MGCP H323

> Hi,
> 
> I did several time no mgcp /mgcp with no effects, but I will check all 
> your recommendations. We are also running ATA boxes, which will need fax 
> passthrough. Or do they support t38 now?
> 
> Many thanks
> 
> Scott Voll schrieb:
> > check to make sure your Router is not set to Fax Relay.  I had a CCM 
> > blade that came up as Fax Relay by default in the CCM --> gateway
> config.
> >  
> > Scott
> > 
> > On Mon, Mar 10, 2008 at 12:36 PM, Kalle Tetto <tettokalle at hotmail.com 
> > <mailto:tettokalle at hotmail.com>> wrote:
> > 
> >     Hi,
> > 
> >     We have a Cisco Fax Server, Captaris 9.3 installed. Connecting via
> H323
> >     to a Cisco CCM Cluster 4.2(3). The CCM is connected via MGCP PRI to
> the
> >     PSTN.
> > 
> >     PSTN<->MGCP VGW E1/PRI <-> CCM 4.2(3) <-> Fax Server H323
> > 
> >     If I call in from PSTN I can see resource unavailable on the Q931
> Debug
> >     of IOS. I could not test from inside currently, because we
> configured
> >     remotely with no one onsite.
> > 
> >     I receive this error after 3 rings. If I call out from Fax Server it
> >     seems to be the same, the called FAX or phone rings, but after 3
> rings
> >     the Fax server says destination busy.
> > 
> >     I have checked for codec mismatches, but could not find any error.
> Also
> >     I have MTP, Transcoding and Conferencing configured. I will test
> >     tomorrow without Media Resources, only to be sure.
> > 
> >     Has anyone had this before?
> > 
> >     Has anyone this setup running, if so could you please pass me the
> >     running MGCP Config and the setup in the Fax Server.
> > 
> >     Many Thanks and all the best.
> > 
> >     _______________________________________________
> >     cisco-voip mailing list
> >     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> >     https://puck.nether.net/mailman/listinfo/cisco-voip
> > 
> > 
> > 
> > ------------------------------------------------------------------------
> > 
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list