[cisco-voip] CUPS issue with AD

[al]

Hi Gregor,

I followed your thread last week.

1-  For the LDAP type, I choose Microsoft AD

2- My UserID in the CUCM exactly match the samaccountname in AD ( I 
checked this part several times - case sensitive too)

3- I effectively used an LDAP browser, and all the attributes are as 
expected by the CUPS

(I use this LDAP server, for an other application (clik&dial) and it 
works, but for presence, maybe I am missing something)

Thank you for your input.
If you have other tips, don't hesitate.

Regards,


Gregor Weißenfels wrote:
> Hi,
>
> did you choose the right LDAP type (Drop down menu with Microsoft and Netscape LDAP) in CUPS->CUPC->Settings?
>
> The UserID in the CUCM must exactly match the samaccountname in AD. The attributes, that you can change in CUPS, are case sensitive.
>
> I got the same error with Lotus LDAP:
> http://www.gossamer-threads.com/lists/cisco/voip/81939
>
> Checking the attributes with an LDAP Browser against the CUPS settings helped me solving the problem.
>
> HTH!
>
> regards,
> Gregor
>
> -------- Original-Nachricht --------
>   
>> Datum: Tue, 11 Mar 2008 23:04:38 +0100
>> Von: al <massalia7 at free.fr>
>> An: cisco-voip at puck.nether.net
>> Betreff: [cisco-voip] CUPS issue with AD
>>     
>
>   
>> Hi,
>>
>> I am trying to interconnect a CCM 5.1.3 with a Cisco Unified Personal
>> Server 6.0.2.1101-1, and I am having some issues.
>> I am using CUPC 1.2.(2.11220)
>> I am using Microsoft AD Server (2003 SP1 English) (for the presence 
>> side, not for CUCM)
>>
>> I read the administration guide of CUPS 6.0.1, and I followed this link
>> in order to troubleshoot my configuration:
>>
>> http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186
>>
>> a00808a2b0d.shtml 
>> <http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00808a2b0d.shtml>
>>
>>
>> - The troubleshooter shows all green.
>>
>> - CUPC shows all green.
>> - All the recommandation in the troubleshooting guide are followed.
>>
>> - SIP trunk between CUCM and CUPS is configured as it appears in the 
>> administration guide.
>>
>> When using CUPC (Desk Phone or Softphone) I cannot add user to group.
>> When I search user in Active Directory I find nothing (parameters of my 
>> AD are good,
>> troubleshooter show green)
>> When I use an LDAP Browser, all information are accurate. I can find my 
>> users in the
>> Active Directory.
>>
>> In Active directory (Username = Login name in CUPS and Phone Number = 
>> Phone Number used in
>> CUPS.
>>
>> In my actual configuration I cannot add other user to my contact list,
>> cannot see the presence settings and cannot use IM (due to the two 
>> previous point)
>>
>> But, when using the ccmuser page of the presence server, I can add user 
>> to my contact
>> group and I can see the correct presence state of the user, can use IM.
>> All works great, but it is not a scalable way of using presence.
>>
>> Thank you in advance for any clarification or explanation.
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>     
>
>
>