[cisco-voip] Cisco Channel Usage question

[Wes Sisk]

I see you have a COR list applied.  Is the incoming peer/outgoing peer 
permitted by the COR?

/Wes

Joseph Mays wrote:
> Wes --
>
>>  'show dial-plan number 8009466382' on the router to see what you get.
>> other useful debugs:
>> debug voip ccapi inout
>
> Thanks for the input. I was using debug voip ccapi inout before, but 
> didn't try it in this latest event. I'll give it a shot. I included 
> the output of 'show dial-plan number 8009466382' in my initial posting 
> to the list, but I'll put it in again here --
>
> nas01#show dialplan number 8009466382
> Macro Exp.: 8009466382
>
> VoiceEncapPeer8800
>        peer type = voice, information type = voice,
>        description = `',
>        tag = 8800, destination-pattern = `800.......',
>        answer-address = `', preference=0,
>        CLID Restriction = None
>        CLID Network Number = `'
>        CLID Second Number sent
>        source carrier-id = `', target carrier-id = `',
>        source trunk-group-label = `',  target trunk-group-label = `',
>        numbering Type = `unknown'
>        group = 8800, Admin state is up, Operation state is up,
>        incoming called-number = `', connections/maximum = 0/unlimited,
>        DTMF Relay = disabled,
>        huntstop = disabled,
>        in bound application associated: 'DEFAULT'
>        out bound application associated: ''
>        dnis-map =
>        permission :both
>        incoming COR list:maximum capability
>        outgoing COR list:minimum requirement
>        Translation profile (Incoming):
>        Translation profile (Outgoing):
>        incoming call blocking:
>        translation-profile = `'
>        disconnect-cause = `no-service'
>        type = pots, prefix = `',
>        forward-digits default
>        session-target = `', voice-port = `1/0:5:0',
>        direct-inward-dial = disabled,
>        digit_strip = disabled,
>        register E.164 number with GK = TRUE
>        fax rate = system,   payload size =  20 bytes
>
>        Time elapsed since last clearing of voice call statistics never
>        Connect Time = 0, Charged Units = 0,
>        Successful Calls = 2, Failed Calls = 0, Incomplete Calls = 0
>        Accepted Calls = 0, Refused Calls = 0,
>        Last Disconnect Cause is "10  ",
>        Last Disconnect Text is "normal call clearing (16)",
>        Last Setup Time = 92636869.
> Matched: 8009466382   Digits: 3
> Target:
>
> nas01#