[cisco-voip] Cisco Channel Usage question
Joseph Mays
mays at win.net
Wed Mar 12 12:14:42 EDT 2008
Wes --
> 'show dial-plan number 8009466382' on the router to see what you get.
> other useful debugs:
> debug voip ccapi inout
Thanks for the input. I was using debug voip ccapi inout before, but didn't
try it in this latest event. I'll give it a shot. I included the output of
'show dial-plan number 8009466382' in my initial posting to the list, but
I'll put it in again here --
nas01#show dialplan number 8009466382
Macro Exp.: 8009466382
VoiceEncapPeer8800
peer type = voice, information type = voice,
description = `',
tag = 8800, destination-pattern = `800.......',
answer-address = `', preference=0,
CLID Restriction = None
CLID Network Number = `'
CLID Second Number sent
source carrier-id = `', target carrier-id = `',
source trunk-group-label = `', target trunk-group-label = `',
numbering Type = `unknown'
group = 8800, Admin state is up, Operation state is up,
incoming called-number = `', connections/maximum = 0/unlimited,
DTMF Relay = disabled,
huntstop = disabled,
in bound application associated: 'DEFAULT'
out bound application associated: ''
dnis-map =
permission :both
incoming COR list:maximum capability
outgoing COR list:minimum requirement
Translation profile (Incoming):
Translation profile (Outgoing):
incoming call blocking:
translation-profile = `'
disconnect-cause = `no-service'
type = pots, prefix = `',
forward-digits default
session-target = `', voice-port = `1/0:5:0',
direct-inward-dial = disabled,
digit_strip = disabled,
register E.164 number with GK = TRUE
fax rate = system, payload size = 20 bytes
Time elapsed since last clearing of voice call statistics never
Connect Time = 0, Charged Units = 0,
Successful Calls = 2, Failed Calls = 0, Incomplete Calls = 0
Accepted Calls = 0, Refused Calls = 0,
Last Disconnect Cause is "10 ",
Last Disconnect Text is "normal call clearing (16)",
Last Setup Time = 92636869.
Matched: 8009466382 Digits: 3
Target:
nas01#
More information about the cisco-voip
mailing list