[cisco-voip] Problems dialing out on E1 R2 in Venezuele

[SARKANY August]

Hi,,

 

could anyone provide me with hints for our E1 R2 problem.

 

We have two separate E1 links (one incoming one outgoing)

Incoming is working

Outgoing is not working

 

All configurations are done:

 

Config E1 controller E1 (0/2/0 is the outgoing one)

 

controller E1 0/0/0
 framing NO-CRC4 
 ds0-group 0 timeslots 1-15 type r2-digital r2-compelled ani
 cas-custom 0
  country venezuela
  answer-signal group-a 6
  dnis-complete
 description incoming Voice
!
controller E1 0/2/0
 framing NO-CRC4 
 ds0-group 1 timeslots 1-15 type r2-digital r2-compelled ani
 cas-custom 1
  country venezuela
  answer-signal group-a 6
  dnis-complete
 description outgoing Voice

 

 

Debug:

Mar 19 12:32:37:  (1) vnm_dsprm_hunt_channel htsp=0x46FAF25C
next_free=0x46FAF7F4 LS=0

Mar 19 12:32:37:  (2) vnm_dsprm_hunt_channel htsp=0x46FAF25C
next_free=0x46FAF7F4

Mar 19 12:32:37: TGRM: reg_invoke_tgrm_call_update(0, 2, 0, 1, 9,
TGRM_CALL_BUSY, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)

Mar 19 12:32:37: htsp_timer_stop3 htsp_setup_req

Mar 19 12:32:37: htsp_process_event: [0/2/0:1(9), R2_Q421_IDLE,
E_HTSP_SETUP_REQ]

Mar 19 12:32:37: r2_q421_seize(0/2/0:1(9)) E_HTSP_SETUP_REQ
DNIS=004369915773346 ANI=

Mar 19 12:32:37: r2_q421_seize(0/2/0:1(9)) Tx
SEIZUREvnm_dsp_set_sig_state:[R2 Q.421 0/2/0:1(9)] set signal state =
0x0

Mar 19 12:32:37: htsp_timer - 5000 msec

Mar 19 12:32:37: htsp_process_event: [0/2/0:1(9), R2_Q421_OG_SEIZE,
E_DSP_SIG_1100]

Mar 19 12:32:37: r2_q421_seize_ack(0/2/0:1(9)) Rx SEIZE ACK

Mar 19 12:32:37: htsp_timer_stop 

Mar 19 12:32:37: r2_reg_start_dialing(0/2/0:1(9))

Mar 19 12:32:37: r2_reg_process_event: [0/2/0:1(9), R2_REG_IDLE,
E_R2_REG_START_DIAL(91)] 

Mar 19 12:32:37: r2_reg_start_dial_delay(0/2/0:1(9)) dialout delay 200

Mar 19 12:32:37: r2_reg_timer(0/2/0:1(9)) 200 msec

Mar 19 12:32:37: r2_reg_process_event: [0/2/0:1(9), R2_REG_IDLE,
E_R2_REG_EVENT_TIMER(84)] 

Mar 19 12:32:37: r2_reg_start_dial(0/2/0:1(9))

Mar 19 12:32:37: R2 Outgoing Voice(0/0): DSX (E1 0/2/0:8): STATE:
R2_OUT_IDLE R2 Got Event R2_START

Mar 19 12:32:37: r2_reg_generate_digits(0/2/0:1(9)): Tx digit '#'

Mar 19 12:32:37: r2_reg_generate_digits(0/2/0:1(9)): Tx digit '0'

Mar 19 12:32:47: htsp_dialing_done(0/2/0:1(9))

Mar 19 12:32:57: htsp_timer_stop3 

Mar 19 12:32:57: htsp_process_event: [0/2/0:1(9), R2_Q421_OG_SEIZE_ACK,
E_DSP_DIALING_DONE]

Mar 19 12:32:57: r2_q421_dial_done(0/2/0:1(9)) E_HTSP_RELEASE_REQ

Mar 19 12:32:57: r2_reg_dial_done(0/2/0:1(9))htsp_release_req: cause 0,
no_onhook 0

Mar 19 12:32:57: htsp_process_event: [0/2/0:1(9), R2_Q421_OG_SEIZE_ACK,
E_HTSP_RELEASE_REQ]

Mar 19 12:32:57: r2_q421_clr_fwd(0/2/0:1(9)) E_HTSP_RELEASE_REQ

Mar 19 12:32:57: r2_reg_channel_disconnected(0/2/0:1(9))

Mar 19 12:32:57: R2 Outgoing Voice(0/0): DSX (E1 0/2/0:8): STATE:
R2_OUT_PROCESS_A R2 Got Event R2_STOP

Mar 19 12:32:57: r2_q421_clr_fwd(0/2/0:1(9)) Tx CLEAR
FWDvnm_dsp_set_sig_state:[R2 Q.421 0/2/0:1(9)] set signal state = 0x8

Mar 19 12:32:57: htsp_timer - 1000 msec

Mar 19 12:32:57: r2_reg_process_event: [0/2/0:1(9), R2_REG_DIALING,
E_R2_REG_DISCONNECT(89)] 

Mar 19 12:32:57: r2_reg_disconnect_dial(0/2/0:1(9))

Mar 19 12:32:57: R2 Outgoing Voice(0/0): DSX (E1 0/2/0:8): STATE:
R2_OUT_IDLE R2 Got Event R2_STOP

Mar 19 12:32:57: r2_reg_timer_stop(0/2/0:1(9))

Mar 19 12:32:57: htsp_process_event: [0/2/0:1(9), R2_Q421_OG_CLR_FWD,
E_DSP_SIG_1000]

Mar 19 12:32:57: r2_q421_clr_fwd_idle(0/2/0:1(9)) Rx IDLE

Mar 19 12:32:57: htsp_timer_stop 

Mar 19 12:32:57: r2_q421_clr_fwd_idle(0/2/0:1(9)) Tx IDLE

csim: loop = 1, failed = 1  

csim: call attempted = 1, setup failed = 1, tone failed = 0

 

ve-ccs-ob-ro1#vnm_dsp_set_sig_state:[R2 Q.421 0/2/0:1(9)] set signal
state = 0x8

Mar 19 12:32:57: r2_reg_channel_disconnected(0/2/0:1(9))

Mar 19 12:32:57: TGRM: reg_invoke_tgrm_call_update(0, 2, 0, 1, 9,
TGRM_CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)

Mar 19 12:32:57: r2_reg_process_event: [0/2/0:1(9), R2_REG_IDLE,
E_R2_REG_DISCONNECT(89)] 

Mar 19 12:32:57: r2_reg_disconnect_idle(0/2/0:1(9))

Mar 19 12:32:57: R2 Outgoing Voice(0/0): DSX (E1 0/2/0:8): STATE:
R2_OUT_IDLE R2 Got Event R2_STOP

Mar 19 12:32:57: r2_reg_timer_stop(0/2/0:1(9))

Mar 19 12:32:57: flex_dsprm_close_cleanup

 

Any hint is usefull.

 

Regards

 

August

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080319/a5596652/attachment.html