[cisco-voip] CME: pressing CFWall needs a # after the internal extension or end call
Paul
asobihoudai at yahoo.com
Fri Mar 21 10:09:38 EDT 2008
Have you tried configuring your transfer patterns
underneath telephony-service?
e.g.
transfer pattern 33..
Paul
--- Anthony Kouloglou <akoul at dataways.gr> wrote:
---------------------------------
Good Morning,
yes, they have 33XX. I have also configured 4XXX for
voice mail, AAs etc
Paul Choi wrote:
Anthony,Are all of your internal extensions four
digits andstarting with 33?Paul--- Anthony Kouloglou
<akoul at dataways.gr>
wrote:--------------------------------- Hi all,this
is my config regarding the dial-peer pots andtelephony
service.I don't see any overlapping dial-peers for
localextensions: 33XXdial-peer voice 1030 pots
destination-pattern 00T direct-inward-dial port
0/3/0:15 prefix 00!dial-peer voice 1200 pots
description ### Connected to FAX-1 ###
destination-pattern 3333 port 2/0/0!dial-peer voice
1201 pots description ### Connected to FAX-2 ###
destination-pattern 3334 port 2/0/1!dial-peer voice
1202 pots description ### Connected to FAX-3 ###
destination-pattern 3335 port 2/0/2!dial-peer voice
1203 pots description ### Connected to FAX-4 ###
destination-pattern 3336 port 2/0/3!dial-peer voice
1204 pots port 2/0/4!dial-peer voice 1205 pots port
2/0/5!dial-peer voice 1206 pots port 2/0/6!dial-peer
voice 1207 pots port 2/0/7!dial-peer voice 1208 pots
direct-inward-dial port 2/0/8!dial-peer voice 1209
pots direct-inward-dial port 2/0/9!dial-peer voice
12010 pots direct-inward-dial port 2/0/10!dial-peer
voice 12011 pots direct-inward-dial port
2/0/11!dial-peer voice 12016 pots direct-inward-dial
port 2/0/16!dial-peer voice 12017 pots
direct-inward-dial port 2/0/17!dial-peer voice 12018
pots direct-inward-dial port 2/0/18!dial-peer voice
12019 pots direct-inward-dial port 2/0/19!dial-peer
voice 12020 pots direct-inward-dial port
2/0/20!dial-peer voice 12021 pots destination-pattern
3379 port 2/0/21!dial-peer voice 4000 voip description
### Calls to CUE ### destination-pattern 4000 session
protocol sipv2 session target ipv4:10.200.100.2
dtmf-relay sip-notify codec g711ulaw no vad
!dial-peer voice 4001 voip description ### MWI ON
Number ### destination-pattern 4001.... session
protocol sipv2 session target ipv4:10.200.100.2
dtmf-relay sip-notify codec g711ulaw no vad!dial-peer
voice 4002 voip description ### MWI OFF Number ###
destination-pattern 4002.... session protocol sipv2
session target ipv4:10.200.100.2 dtmf-relay sip-notify
codec g711ulaw no vad!dial-peer voice 4010 voip
description ### Calls to CUE Legacy AA ###
destination-pattern 4010 session protocol sipv2
session target ipv4:10.200.100.2 dtmf-relay sip-notify
codec g711ulaw no vad!dial-peer voice 4011 voip
description ### Calls to XXXXXX AA ###
destination-pattern 4011 session protocol sipv2
session target ipv4:10.200.100.2 dtmf-relay sip-notify
codec g711ulaw no vad!dial-peer voice 4012 voip
description ### Calls to Notify Voice Callers For
NewNumbers ### destination-pattern 4012 session
protocol sipv2 session target ipv4:10.200.100.2
dtmf-relay sip-notify codec g711ulaw no vad!
dial-peer voice 4013 voip description ### Calls to
Notify FAX Callers For NewNumbers ###
destination-pattern 4013 session protocol sipv2
session target ipv4:10.200.100.2 dtmf-relay sip-notify
codec g711ulaw no vad!dial-peer voice 4020 voip
description ### Calls to CUE Prompt Management ###
destination-pattern 4020 session protocol sipv2
session target ipv4:10.200.100.2 dtmf-relay sip-notify
codec g711ulaw no vad!dial-peer voice 4050 voip
description ### Calls to CUE Recording Pilot ###
destination-pattern 4050 session protocol sipv2
session target ipv4:10.200.100.2 dtmf-relay sip-notify
codec g711ulaw no vad!dial-peer voice 1031 pots
destination-pattern 02......... direct-inward-dial
port 0/3/0:15 prefix 2!dial-peer voice 1032 pots
destination-pattern 06......... direct-inward-dial
port 0/3/0:15 prefix 6!dial-peer voice 4014 voip
description ### No one is here...Please Call
Tomorrow### destination-pattern 4014 session protocol
sipv2 session target ipv4:10.200.100.2 dtmf-relay
sip-notify codec g711ulaw no vad ! dial-peer
voice 1041 pots destination-pattern 2.........
direct-inward-dial port 0/3/0:15 prefix 2 !
dial-peer voice 1042 pots destination-pattern
6......... direct-inward-dial port 0/3/0:15 prefix 6 !
dial-peer voice 1050 pots destination-pattern
1T direct-inward-dial port 0/3/0:15 prefix 1 !
dial-peer voice 1051 pots destination-pattern 8T
direct-inward-dial port 0/3/0:15 prefix 8 !
dial-peer voice 1 pots destination-pattern .
direct-inward-dial!telephony-service sdspfarm units 2
sdspfarm transcode sessions 2 sdspfarm tag 2 XCODER
load 7914 S00105000200 load 7921 CP7921G-1.0.3 load
7941 SCCP41.8-2-2SR2S load 7961 SCCP41.8-2-2SR2S load
7975 SCCP75.8-3-2S load 7965 SCCP45.8-3-2S load 7945
SCCP45.8-3-2S load 7936 cmterm_7936.3-3-12-0 load 7906
SCCP11.8-2-2SR2S max-ephones 60 max-dn 150 ip
source-address 10.200.2.254 port 2000 system message
CME IP Telephony System url directories
http://10.200.2.254/local-directory url
serviceshttp://10.200.100.2/voiceview/common/login.do
urlauthenticationhttp://10.200.100.2/voiceview/authentication/authenticate.do
time-zone 26 time-format 24 date-format dd-mm-yy
dialplan-pattern 1 XXXXXX3310 extension-length 1
dialplan-pattern 2 XXXXXX3312 extension-length 1
voicemail 4000 max-conferences 16 gain -6 moh
music-on-hold.au web admin system name admin password
system dn-webedit time-webedit transfer-system
full-consult transfer-pattern 02.........
transfer-pattern 06......... transfer-pattern .T
transfer-pattern 2......... transfer-pattern
6......... night-service code *123 night-service day
Mon 15:00 20:00 night-service day Tue 15:00 20:00
night-service day Wed 15:00 20:00 night-service day
Thu 15:00 20:00 night-service day Fri 15:00 20:00
directory last-name-first create cnf-files
version-stamp 7960 Mar 19 200814:31:00!dschulz wrote:
Anthony - We'll need somefurtherinformation to
help you determine your issue here. First, whatnumber
are you trying to use with CFWallfeature, and, what
happenswhen you simply dial-it fromthe phone. You may
want to compare whatyou aredialing with your actual
dial-plan. CM will take thebestmatch after the T302
expires. Make sure that whatyou are dialing doesnot
have any overlap (4-5-6 digitdialpatterns).
Also, what version ofCallManager are you using? (the
function of the CSS in the CFWallfeature isimportant
here in CMv6). HTH, Dave
---------------------------------From:cisco-voip-bounces at puck.nether.net[mailto:cisco-voip-bounces at puck.nether.net]On
Behalf Of AnthonyKouloglou Sent: Wednesday, March 19,
2008 12:44 PM To: cisco-voip at puck-nether.net
Subject: [cisco-voip] CME: pressing CFWall needs a
#after theinternal extension or end call Hi, what
should i consider looking in myconfig if awanted to
resolve this problem.A User presses CFWall, line
opens, presses the 4digit internalextension and
nothing happens.He/she has to press either # or end
call to take thechange. Also, when pressing redial,
takes too long (3 secs) tomake the call. Any ideas?
Thanks a lot,Anthony >
_______________________________________________
cisco-voip mailing
listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
____________________________________________________________________________________Never
miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
More information about the cisco-voip
mailing list