[cisco-voip] CER 2.x disaster recovery

[Eric Pedersen]

Thanks.  Given that CER 2.x is built on the same OS as CCM 5.x, it is
strange to me that they would not give you the option to patch during
install.  

 

________________________________

From: Dennis Heim [mailto:Dennis.Heim at cdw.com] 
Sent: March 27, 2008 11:07 AM
To: Eric Pedersen; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CER 2.x disaster recovery

 

There is a 2.0(3) disk that is out. See if you can get a hold of that.

 

Dennis Heim
Network Voice Engineer
Berbee
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell

dennis.heim at cdw.com
www.berbee.com <http://www.berbee.com/> 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Eric Pedersen
Sent: Thursday, March 27, 2008 11:03 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CER 2.x disaster recovery

 

I just installed a CER 2.0 publisher and subscriber.  I had 2.0(1) media
and used the iso off CCO to upgrade to 2.0(3).  I am concerned if I have
to rebuild the subscriber at some point.  Unlike callmanager 5.x there
is no option to install a patch at install time, so I would have to
reinstall the subscriber with 2.0(1) before I can patch.  Will this
cause problems if it tries to synchronize to the 2.0(3) publisher?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080328/523a2039/attachment.html