[cisco-voip] FXO + Paging module

[James Buchanan]

Hello,

What is the model of Valcom?

Thanks,

James

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Paul
Sent: Thursday, May 01, 2008 8:13 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXO + Paging module

Hi folks,

I have an FXO module that is connected to a self-amplified Valcom paging
module and when I dial the number associated with the destination
pattern that I've associated with that port, I get nothing. I've
attached a Bogen PCM2000 to an FXO port before and it worked
beautifully. This time I'm having a lot more trouble. If anyone has any
suggestions or hints, it'd be much appreciated.

This is a 3845 + VIC2-2FXO running 12.4(9)T4.

This is a CCME box.

Paul



 
________________________________________________________________________
____________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip