[cisco-voip] FXO + Paging module

[Scot Gossen]

If you call Valcom support they will tell you that they do not sell a device to interface with a cisco FXO port. We typically use the Valcom V9970 with an FXS port.

-Go0se

Paul <asobihoudai at yahoo.com> wrote: Hi folks,

I have an FXO module that is connected to a self-amplified Valcom paging module and when I dial the number associated with the destination pattern that I've associated with that port, I get nothing. I've attached a Bogen PCM2000 to an FXO port before and it worked beautifully. This time I'm having a lot more trouble. If anyone has any suggestions or hints, it'd be much appreciated.

This is a 3845 + VIC2-2FXO running 12.4(9)T4.

This is a CCME box.

Paul



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080502/b535501e/attachment.html