[cisco-voip] FXO + Paging module

[Jason Aarons (US)]

I've worked with Valcom support in the past, I suggest calling then
back, similar to Cisco TAC the first person may not always know what
they are talking about!

 

A V2003A works great with CallManager and FXO port.

 

Anything with FXS risks disconnect supervision problems.  FXS disconnect
supervision varies by product within Cisco. For example a ATA-188/SCCP
with CCM 4.x is different than CME in regards to FXS disconnect
supervision.

 

By sticking with FXO you don't have this issue.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scot Gossen
Sent: Friday, May 02, 2008 12:51 PM
To: Paul; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] FXO + Paging module

 

If you call Valcom support they will tell you that they do not sell a
device to interface with a cisco FXO port. We typically use the Valcom
V9970 with an FXS port.

-Go0se

Paul <asobihoudai at yahoo.com> wrote:

Hi folks,

I have an FXO module that is connected to a self-amplified Valcom paging
module and when I dial the number associated with the destination
pattern that I've associated with that port, I get nothing. I've
attached a Bogen PCM2000 to an FXO port before and it worked
beautifully. This time I'm having a lot more trouble. If anyone has any
suggestions or hints, it'd be much appreciated.

This is a 3845 + VIC2-2FXO running 12.4(9)T4.

This is a CCME box.

Paul



________________________________________________________________________
____________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

  

________________________________

Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try
it now.
<http://us.rd.yahoo.com/evt=51733/*http:/mobile.yahoo.com/;_ylt=Ahu06i62
sR8HDtDypao8Wcj9tAcJ%20> 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080502/852a4c88/attachment-0001.html