[cisco-voip] T1 half working half not

[Wes Sisk]

that address is a poison pattern.  what platform is this?  most likely a 
software issue => new TAC case.

/Wes

Lelio Fulgenzi wrote:
> For some reason a T1/PRI got into a crazy state that appeared 
> unregistered on CCM but up/up on the show controllers on the router. 
> Inbound calls from the PSTN were not routed to the next port. I had to 
> go in and do a shut/no shut on the controller in order to get it back 
> up and running.
>  
> Any idea what could cause this? The router shows "System returned to 
> ROM by bus error at PC 0x6073C820, address 0xB0D0B0D at 03:26:26 EDT 
> Sun May 4 2008".
>  
> I'm just wondering if this is something we should open a TAC case for 
> and have some hardware replaced.
>  
> Lelio
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Java-Clavis-Domus Theorem: The ability to keep your hands on the home 
> keys is inversely
> related to the amount of caffeine ingested in the last 30 minutes.
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080506/8c070b0d/attachment.html