[cisco-voip] Dynamic Bandwidth for QoS

[Jorge L. Rodriguez Aguila]

For "On Demand" Bandwidth solutions you will have to go with RSVP.

http://www.cisco.com/en/US/docs/ios/solutions_docs/qos_solutions/QoSVoIP/QoSVoIP.html#wp1071916


Jorge Rodríguez Aguila
CCNA,CCVP,CRMCS,CIPCES
Senior Voice/Data Network Consultant
Netxar Technologies
jorge.rodriguez at netxar.com
Office 787-765-0058
PCS 787-688-8530
[cid:image001.png at 01C8AFAC.3ED74470]



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Lima
Sent: Tuesday, May 06, 2008 4:59 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Dynamic Bandwidth for QoS

Hi all, I have two Cisco 2801 with CCME 4.0 in different sites, my data/voice bandwidth link has 1Mb, Is it possible to configure a dynamic "bandwidth on demand" allocation for QoS, I mean if some amount of BW is not used for data, it could be used or assigned dynamically for voice traffic?.
If is it possible, could any one can give a tip or a good link as an example.
Thanks a lot guys
DAL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080506/af61de76/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6292 bytes
Desc: image001.png
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20080506/af61de76/attachment-0001.png