[cisco-voip] Dynamic Bandwidth for QoS

[Ryan West]

David,

Lookup LLQ examples on Cisco.  You will have to get your carrier to apply QoS from the edge, assuming that these are not point to point links.

-ryan

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Lima
Sent: Tuesday, May 06, 2008 4:59 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Dynamic Bandwidth for QoS

Hi all, I have two Cisco 2801 with CCME 4.0 in different sites, my data/voice bandwidth link has 1Mb, Is it possible to configure a dynamic "bandwidth on demand" allocation for QoS, I mean if some amount of BW is not used for data, it could be used or assigned dynamically for voice traffic?.
If is it possible, could any one can give a tip or a good link as an example.
Thanks a lot guys
DAL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080506/ebea59ce/attachment.html