[cisco-voip] Tandberg E85 MXP

[Mike Hawley (AU)]

Hi, I was wondering if anyone had integrated the Tandberg Edge 85 MXP units with the CUCM 6.1?  I have them set up as H323 clients, and can make video calls successfully between Tandberg's using the CUCM for Call Control.  When I try and make a call to a SCCP device (Tandberg units included) on the same network,  I get media but no Video.

All the best

Mike Hawley


******************************************************************************
 - NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information.  If you have received this email in error, please notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any attachments for viruses.  Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.
******************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080508/a8cc3111/attachment.html