[cisco-voip] Bulk update Line

[Dennis Heim]

IF BAT cannot do it, the only other supported method would be to use the AXL API.

 

Dennis Heim
Network Voice Engineer
Berbee
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell

dennis.heim at cdw.com <mailto:dennis.heim at cdw.com> 
www.berbee.com <http://www.berbee.com/> 

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of voip at mrga.ch
Sent: Thursday, May 08, 2008 3:50 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Bulk update Line

 

Hello Group

we run a callmanager 4.2(3) and have to bulk update the lines. we have a list with all the changes we have to write to the fields "Display (internal Caller ID)" and " Alerting Name". We tried to update the lines with bat. However, bat does not offer the fields in the Lines update section.
Does anybody know a way how we could bulk update the two fields from our list.

Thanks
Reto    

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080508/064b09cb/attachment.html