[cisco-voip] VG248 Spontaneous Reloads

[Frank Wakelin]

Thanks for the quick reply!
 
The HTTP traffic won't be an issue (ACLs would prevent this traffic) - I
will look into the call waiting/busy out offhook ports settings though
an get back to you.

________________________________

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Thursday, May 08, 2008 8:02 AM
To: Frank Wakelin
Cc: Cisco VOIP Newsletter - puck. nether. net
Subject: Re: [cisco-voip] VG248 Spontaneous Reloads


Hi Frank,

There are couple things that can cause this:

CSCuk38606 Excessive HTTP traffic causes VG248 reload

CSCec67063 VG248 reloads unexpectedly - this one is particularly
interesting and challenging.  It involves high call volume inbound to
the vg248 on ports with call waiting enabled and possibly the 'busy out
offhook ports' enabled.

Do either of these fit your use cases?

/wes

Frank Wakelin wrote: 

	We have been experiencing an issue with more then one of our
VG248.  They seem to be spontaeously restarting for some as of yet
unknown reason.  We contacted TAC and almost immidiately they issued an
RMA.  We replaced the two units, and upgraded all firmware to the
lastest.  The issue still continues however.  
	 
	Has anyone else seen this behavior before?
	 
	---
	Frank
	 
	
________________________________


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080508/d2d15823/attachment.html