[cisco-voip] VG248 Spontaneous Reloads

[Wes Sisk]

Hi Frank,

There are couple things that can cause this:

CSCuk38606 Excessive HTTP traffic causes VG248 reload

CSCec67063 VG248 reloads unexpectedly - this one is particularly 
interesting and challenging.  It involves high call volume inbound to 
the vg248 on ports with call waiting enabled and possibly the 'busy out 
offhook ports' enabled.

Do either of these fit your use cases?

/wes

Frank Wakelin wrote:
> We have been experiencing an issue with more then one of our VG248.  
> They seem to be spontaeously restarting for some as of yet unknown 
> reason.  We contacted TAC and almost immidiately they issued an RMA.  
> We replaced the two units, and upgraded all firmware to the lastest.  
> The issue still continues however. 
>  
> Has anyone else seen this behavior before?
>  
> ---
> Frank
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080508/af363506/attachment.html