[cisco-voip] VG248 Spontaneous Reloads

[Lelio Fulgenzi]

There is a bug which causes reboots if the lines are configured for call waiting. Something to do with it not releasing/answering the call properly. In our case we had an analog interface to a paging/radio device and disabled call waiting and no more problems.

We too went through a few replacements. Wes helped us out on this one.

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Java-Clavis-Domus Theorem: The ability to keep your hands on the home keys is inversely
related to the amount of caffeine ingested in the last 30 minutes. 

  ----- Original Message ----- 
  From: Frank Wakelin 
  To: Cisco VOIP Newsletter - puck. nether. net 
  Sent: Wednesday, May 07, 2008 12:11 PM
  Subject: [cisco-voip] VG248 Spontaneous Reloads


  We have been experiencing an issue with more then one of our VG248.  They seem to be spontaeously restarting for some as of yet unknown reason.  We contacted TAC and almost immidiately they issued an RMA.  We replaced the two units, and upgraded all firmware to the lastest.  The issue still continues however.  

  Has anyone else seen this behavior before?

  ---
  Frank



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080507/20ef1953/attachment.html