[cisco-voip] i get busy error w/ isdn incoming calls.

[Kelemen Zoltan]

Your provider IS sending you only three digits and that's it. It could 
be a mistake on their side, if you're agreed to 4 or more with them 
previously, or it's just the way they do it.

You can easily support this using the appropriate (three digit) 
translation patterns in CallManager. If you need some ideas, let us know 
what extensions you are using locally.

regards,
  Zoltan

Aykut NURAT wrote:
>
> Hi Everyone,
>
> I have a problem with an mgcp gateway.
>
> I can call from internal ip phones to pstn numbers without a problem. 
> Hence my mgcp gw is up&running and registered to my CCM 6.1. I have an 
> ISDN PRI e1 and it is also up and there is no problem w/ outgoing 
> calls as mentioned before.
>
> But i have problems w/ incoming calls from pstn to internal phones.
>
>  
>
....


>         Called Party Number i = 0x81, '300'  (this line came to me 
> weird i get this when i call 268 87300 , but if i call 268 87324 i get 
> this as 324. As if provider sending only 3 digits??)
>
......

>  
>
> Any comments and suggestions will be highly appreciated.
>
>  
>
> Best,
>
> Aykut
>