[cisco-voip] i get busy error w/ isdn incoming calls.

[James Buchanan]

Hello,

 

When going from 4.1(3) to 4(2)3, I had to make the following MGCP
gateway changes:

 

mgcp package-capability fxr-package

mgcp default-package fxr-package

no mgcp fax t38 inhibit.

 

Thanks,

 

James

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Aykut NURAT
Sent: Monday, May 12, 2008 9:00 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] i get busy error w/ isdn incoming calls.

 

Hi Everyone,

I have a problem with an mgcp gateway.

I can call from internal ip phones to pstn numbers without a problem.
Hence my mgcp gw is up&running and registered to my CCM 6.1. I have an
ISDN PRI e1 and it is also up and there is no problem w/ outgoing calls
as mentioned before.

But i have problems w/ incoming calls from pstn to internal phones.

 

Because this is an urgent situtaion just wanted take your opinions
before making a widened search.

 

Here is isdn q921 and q931 output.

When i call from outside pstn to internal numbers i get the below
output:

 

*May 12 13:36:09.943: ISDN Se0/2/0:15 Q921: User RX <- RRp sapi=0 tei=0
nr=1

*May 12 13:36:09.943: ISDN Se0/2/0:15 Q921: User TX -> RRf sapi=0 tei=0
nr=1

*May 12 13:36:09.947: ISDN Se0/2/0:15 Q921: User RX <- RRf sapi=0 tei=0
nr=1

*May 12 13:36:13.979: ISDN Se0/2/0:15 Q921: User RX <- INFO sapi=0
tei=0, ns=1 nr=1

*May 12 13:36:13.979: ISDN Se0/2/0:15 Q931: SETUP pd = 8  callref =
0x0208 

        Sending Complete 

        Bearer Capability i = 0x8090A3 

                Standard = CCITT 

                Transfer Capability = Speech  

                Transfer Mode = Circuit 

                Transfer Rate = 64 kbit/s 

        Channel ID i = 0xA98381 

                Exclusive, Channel 1 

        Progress Ind i = 0x8283 - Origination address is non-ISDN  

        Display i = 'INTERNATIONAL' 

        Calling Party Number i = 0x0083, '00902123473265' 

                Plan:Unknown, Type:Unknown 

        Called Party Number i = 0x81, '300' 

                Plan:ISDN, Type:Unknown

*May 12 13:36:13.983: ISDN Se0/2/0:15 Q921: User TX -> RR sapi=0 tei=0
nr=2

*May 12 13:36:17.979: ISDN Se0/2/0:15 Q921: User RX <- INFO sapi=0
tei=0, ns=2 nr=1

*May 12 13:36:17.979: ISDN Se0/2/0:15 Q931: SETUP pd = 8  callref =
0x0208 

        Sending Complete 

        Bearer Capability i = 0x8090A3 

                Standard = CCITT 

                Transfer Capability = Speech  

                Transfer Mode = Circuit 

                Transfer Rate = 64 kbit/s 

        Channel ID i = 0xA98381 

                Exclusive, Channel 1 

        Progress Ind i = 0x8283 - Origination address is non-ISDN  

        Display i = 'INTERNATIONAL' 

        Calling Party Number i = 0x0083, '00902123473265' 

                Plan:Unknown, Type:Unknown 

        Called Party Number i = 0x81, '300'  (this line came to me weird
i get this when i call 268 87300 , but if i call 268 87324 i get this as
324. As if provider sending only 3 digits??)

                Plan:ISDN, Type:Unknown

*May 12 13:36:17.983: ISDN Se0/2/0:15 Q921: User TX -> RR sapi=0 tei=0
nr=3

*May 12 13:36:21.979: ISDN Se0/2/0:15 Q921: User RX <- INFO sapi=0
tei=0, ns=3 nr=1

*May 12 13:36:21.979: ISDN Se0/2/0:15 Q931: DISCONNECT pd = 8  callref =
0x0208 

        Cause i = 0x82E6 - Recovery on timer expiry (error code was
"Cause i = 0x8081 - Unallocated/unassigned number" but it changed after
i made some changes)

*May 12 13:36:21.979: ISDN Se0/2/0:15 Q921: User TX -> RR sapi=0 tei=0
nr=4

xxx_MainCampVGw#

 

 

 

I have tried many pri settings on my CCM. I tried decreasing significant
digits coming from pri to 4 and wrote translation patterns to internal
numbers but no way.

 

 

Any comments and suggestions will be highly appreciated. 

 

Best,

Aykut

 

 

No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.23.9/1418 - Release Date:
5/6/2008 5:17 PM

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080512/0c7c0a34/attachment-0001.html