[cisco-voip] Checking NTP status on CCM

[Micah Bennett]

I am not sure.  That is one reason I opened the case with TAC to clear
up the confusion.  One of the Cisco docs says that you should point your
Publisher to the clock server, and everything else to the Publisher.
Another document says that the NTP.conf file can only be used to point
to a clock server and not another node such as subscriber to publisher
or IPCC to publisher.  

 

Our install partner back in 2007 told me to set it up the way it is now.
Publisher to clock, all other boxes to publisher.  I do know that right
now everything appears to be in sync.  Being able to confirm that would
be great.  

 

The other part of my TAC question was related to ntp.conf setup.  We
have implemented a security key on one of our network clocks and plan to
on the second in the coming months.  I need to make sure that NTP
process on our Cisco servers (windows OS) will work with the extra
command related to the security key.  Our linux guy showed me how they
are set up on that side.

 

One of the other replies here on the group mentioned the ntpq command.
Since I am still learning, I googled this and it appears to be a linux
command.  We are on CCM 4.2 with Windows OS.    

 

Micah Bennett

Telecommunications Admin

Automated License Systems

 

  _____  

From: Dennis Heim [mailto:Dennis.Heim at cdw.com] 
Sent: Tuesday, May 13, 2008 9:07 AM
To: Micah Bennett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Checking NTP status on CCM

 

Is it actually allowing you to sync to the Publisher from the other
nodes? 

 

Dennis Heim
Network Voice Engineer
Berbee
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell

dennis.heim at cdw.com
www.berbee.com <http://www.berbee.com/> 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Micah Bennett
Sent: Tuesday, May 13, 2008 9:59 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Checking NTP status on CCM

 

Hello all

My CCM publisher server is pointed to our two NTP servers (via the
NTP.conf) file.  My two CCM subscriber servers and my two IPCC servers
are pointed to the CCM Publisher as their NTP source.

Is there any command I can run on the Publisher to see which of my two
clocks the server is synchronized to at this time?  I opened an
informational ticket with TAC but that seems to be dragging along at a
snails pace. 

Micah Bennett

Telecommunications Admin

Automated License Systems

The information contained in this email and any attachments is
confidential and may be subject to copyright or other intellectual
property protection. If you are not the intended recipient, you are not
authorized to use or disclose this information, and we request that you
notify us by reply mail or telephone and delete the original message
from your mail system.

 


The information contained in this email and any attachments is confidential and may be subject to copyright or other intellectual property protection. If you are not the intended recipient, you are not authorized to use or disclose this information, and we request that you notify us by reply mail or telephone and delete the original message from your mail system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080513/e121bc25/attachment.html