[cisco-voip] nm-hd-2v dsp !!!

[Djokic Sinisa]

hi to all..

 

 

guys, just a little confirmation..

 

according to dsp calculator, nm-hd-2v network module has on the module
itself enough dsp resources to handle 8 calls ( maximum which can be placed
in it )..

so it can be 2 x VIC2-BRI-NT/TE or 2 x 4 FXO or a mixture of those two..

 

i didn't find detail documentation for this module on the site..

 

so, i need to know if i decide to put above mentioned voice cards in
NM-HD-2V network module instead on motherboard ( to save HWIC space ) i hope
i don't need to buy PVDM2-8 for example to handle it..

 

 

thanx..

 

regards..

 

Sinisa Djokic 

System Engineer
CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified

 




  

MDS Informaticki inzenjering
Bul. Arsenija Carnojevica 170
11070 Novi Beograd, Serbia
Tel: +381 11 2015 200, 2015 273
Fax: +381 11 3194 954
www.mds.rs
sdjokic at mds.rs

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080516/00c37fda/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 3486 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20080516/00c37fda/attachment.gif