[cisco-voip] help about configuring a bri port to conect to a dialog board fax server

[Pedro Nogueira]

Hello,
 
i´m trying to configure a bri port to work with a dialogic board fax server, and i never get answer from the fax server. Anyone has instaled already a solution like that ? can anyone tell me the proceding to do it ? My media gateway is working in MGCP, the bri port is configured only with the folowing:
 
interface BRI0/1/0

no ip address

isdn switch-type basic-net3

isdn protocol-emulate network

isdn layer1-emulate network

isdn incoming-voice voice

isdn bind-l3 ccm-manager service mgcp

isdn send-alerting

isdn static-tei 0

isdn skipsend-idverify

the voice port config is:

voice-port 0/1/0

compand-type a-law

cptone PT

and the dial-peer configuration is:

dial-peer voice 10 pots

description Liga Fax Server

destination-pattern 610T

direct-inward-dial

port 0/1/0

forward-digits all

and at last the mgcp is configured as follows:

mgcp
mgcp call-agent 10.101.128.253 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp sgcp disconnect notify
mgcp sgcp restart notify
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
mgcp default-package line-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp validate domain-name
mgcp rtp payload-type g726r16 static
!
mgcp profile default

 

any ideas / sugestions about my configuration ?

 

Thanks,

Pedro 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080520/132db1e2/attachment.html