[cisco-voip] Removing an image from the inactive partition

[dschulz]

sorry....  I stated that wrong.  I am aware of that.  Just wondering about
removing an image....  is that possible?  I know you can overwite it.
 
Dave 
 

  _____  

From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com] 
Sent: Thursday, May 22, 2008 11:45 AM
To: dschulz; cisco voip
Subject: RE: [cisco-voip] Removing an image from the inactive partition



Removing the image will not increase the disk space.  The drives are
partitioned, not shared.

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of dschulz
Sent: Thursday, May 22, 2008 11:40 AM
To: 'cisco voip'
Subject: [cisco-voip] Removing an image from the inactive partition

 

Does anyone know if this is possible (or has done this).....  to remove the
image from the inactive partition.  I have a server running 6.1 that was
upgraded from 6.0.  I would like to remove the 6.0 image to reduce the disk
space.  Thoughts?

 

Dave 


  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080522/2f47b9fc/attachment.html