[cisco-voip] CUCM 6.1 and AD integration !!!

[Jonathan Charles]

Just a quick note, AD passwords are NOT brought over from AD... CCM
encrypts the pw and sends it to AD and requests authentication... the
password stays on AD.


Jonathan

On Wed, May 28, 2008 at 8:40 AM, Djokic Sinisa <sdjokic at mds.rs> wrote:
> well, maybe one potential issue..
>
>
>
>
>
> device association..
>
> using BAT afterwords i suppose?..
>
>
>
>
>
> regards..
>
>
>
> Sinisa Djokic
>
> System Engineer
> CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified
>
>
>
>
>
> MDS Informaticki inzenjering
> Bul. Arsenija Carnojevica 170
> 11070 Novi Beograd, Serbia
> Tel: +381 11 2015 200, 2015 273
> Fax: +381 11 3194 954
> www.mds.rs
> sdjokic at mds.rs
>
>
>
> ________________________________
>
> From: Mladen Milanovic [mailto:mmilanovic at ctiusa.com]
> Sent: Wednesday, May 28, 2008 3:28 PM
> To: Djokic Sinisa; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] CUCM 6.1 and AD integration !!!
>
>
>
> Sinisa,
>
>
>
> It's less painful than in the 4.x versions because you are not performing
> integration – you will do synchronization. That means that selected LDAP
> data will be synced with the CCM. Recently I perform synchronization for
> more than 2000 users and works as a champ.
>
>
>
> Anyway, to answer on your questions:
>
>
>
> 1.       Only end-users will be synced. If end-user is deleted from the AD
> it will be deleted from the Cisco Directory within sync time.
>
> 2.       You can chose what fields from the AD will be used as a userid
>
> 3.       PIN have to be configured in the CCM
>
> 4.       Yes
>
> 5.       All agents have to be configured in the AD
>
> 6.       No. Only think that you need is the user in the Ad that will have
> read rights against AD. Also, you have to know AD path to the user container
>
>
>
> Keep in mind that if AD is down your ICD/EMapp users are up
>
>
>
> If you need more details, just let me know.
>
>
>
> Mladen
>
>
>
>
>
>
>
>
>
> Mladen Milanovic, M.Sc.
>
> Contact Center Engineer
>
> CCNP, CCVP, CQS- IPTOS, IPTSS
>
>
>
> CTI | Coleman Technologies, Inc.
>
> Cell: 954-547-5692
>
> Fax: 954-838-9017
>
> 1550 Sawgrass Corporate Parkway, Suite 360
>
> Sunrise, FL  33323-2818
>
> Email: mmilanovic at ctiusa.com
>
> MSN:  mladen_milanovic at hotmail.com
>
> URL:   www.ctiusa.com
>
>
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Djokic Sinisa
> Sent: Wednesday, May 28, 2008 9:08 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CUCM 6.1 and AD integration !!!
>
>
>
>
>
> hi guys..
>
>
>
>
>
> we need to integrate CUCM 6.1 and microsoft AD..
>
> we had some painfull experience in 4.x versions..
>
> so we're just cautious..beacuse we need to do it in system with 1400
> users..and we don't want re-install anything..
>
> J..
>
>
>
> so, the question is, is it really that harmless as it is decribed..
>
> can someone look bellow in the list of potential questions..
>
>
>
> 1. no application users and system users are integrated, just end-users
>
> 2. userid and password are imported from AD
>
> 3. PIN needs to be configured on CUCM
>
> 4. can we rollback to cisco corporate direcory - cisco LDAP afterwords
>
> 5. what about ICD extension option which was the problem ( we needed to use
> AD tools to enable it - before in 4.x )
>
> 6. do we need to configure anything on AD itself ( schema edit etc. )
>
>
>
>
>
> thanx..
>
>
>
>
>
> regards..
>
>
>
> Sinisa Djokic
>
> System Engineer
> CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified
>
>
>
>
>
> MDS Informaticki inzenjering
> Bul. Arsenija Carnojevica 170
> 11070 Novi Beograd, Serbia
> Tel: +381 11 2015 200, 2015 273
> Fax: +381 11 3194 954
> www.mds.rs
> sdjokic at mds.rs
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>