[cisco-voip] INIT error

[STEVEN CASPER]

Thanks for the info. That was it - booted into BIOS, enabled the COM port, no more spawning.

>>> "Wes Sisk" <wsisk at cisco.com> 5/20/2008 8:09 PM >>>
hmm,

"This is a result of the serial port on this server not being active.  On this server this must be done during system boot by pressing F2 to enter the BIOS.  Go to the Serial Communication section and turn on the serial port."

Do you have a serial port?  Is it enabled in the BIOS?

/Wes

STEVEN CASPER wrote: 

 
After our upgrade to 6.1.1b several of our servers are displaying the following error: 
 
init: ID "SD0" respawning too fast: disabled for 5 minutes. 
 
This is a bug I found for 5.1.3 that shows fixed but provides no other info

CSCsj74466  ( http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&amp;bugId=CSCsj74466 )  Operating System: After an installation, the following error displays: init: ID "SD0" respawning too fast: disabled for 5 minutes.
Anybody have any ideas how to get rid of it?
Thanks!
Steve
 
 
 
 

************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee. If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission. The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
_______________________________________________
cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip

************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080528/d3aa3c71/attachment.html