[cisco-voip] Bussy number - Call Cannot be Completed as Dialed

[Mladen Milanovic]

Guys,

I am connected to Centrex DMS 100 via T1 PRI using primary-ni
signalization. When phone on the Cetrex switch is busy I am getting a
message from the CCM that Call Cannot Be Completed as Dialed. I am using
H.323 as a signaling protocol between CCM 6.0(1a) and VGs

 

Can anyone provide any explanation for this 

 

Thanks

Mladen

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080529/58fe83b2/attachment-0001.html>