[cisco-voip] Bussy number - Call Cannot be Completed as Dialed

[Ryan Ratliff]

The first place to look is a q931 debug at the voice gateway to see  
what disconnect cause is being sent back to CM.

-Ryan

On May 29, 2008, at 10:45 AM, Mladen Milanovic wrote:

Guys,

I am connected to Centrex DMS 100 via T1 PRI using primary-ni  
signalization. When phone on the Cetrex switch is busy I am getting a  
message from the CCM that Call Cannot Be Completed as Dialed. I am  
using H.323 as a signaling protocol between CCM 6.0(1a) and VGs



Can anyone provide any explanation for this



Thanks

Mladen

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080529/ed4353e4/attachment.html>