[cisco-voip] IP Communicator and Unity MWI

[Alex]

Thanks Scott.
IPC and IP Blue are both in <None> partition. CSS on Unity ports has not been explicitly set and is left as <None>.
Any more ideas?
Rgds
Alex
  ----- Original Message ----- 
  From: Scott Voll 
  To: Alex 
  Cc: cisco-voip at puck.nether.net 
  Sent: Thursday, May 29, 2008 6:20 PM
  Subject: Re: [cisco-voip] IP Communicator and Unity MWI


  check the unity ports have the right CSS for the IPC partition.

  Scott


  On Thu, May 29, 2008 at 9:30 AM, Alex <ecralar at hotmail.com> wrote:

    Hello there,
    I am having problems in the lab lighting up MWI on IP Communicator 2.1.1. CM 4.1.3
    integrated with Unity 4.0.5, voicemail left (and verified), MWI/envelope icon on
    IP Communicator does not show up. If I dial "MWI ON" extension from IP
    Communicator, the envelope icon appears.
    MWI on IP Blue connected to the same cluster works fine, envelope appears
    without dialing "MWI ON" extension
    Any suggestions?
    Thanks very much
    Alex

    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080529/4a7ee2e6/attachment-0001.html>