[cisco-voip] Peer Firmware Sharing
Frazee, Timothy
Timothy_Frazee at adp.com
Mon Nov 3 17:03:03 EST 2008
So if I'm deploying 200 phones at a brand new site, how to I use this
feature to speed the deployment of the phones? If the feature is
disabled by default, then when the phone gets auto registered the
feature goes away instantly. (since it found its config, with the option
disabled)
How would I make the feature enabled by default?
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Monday, November 03, 2008 4:00 PM
To: 'Steve G'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Peer Firmware Sharing
Aside from the fact that the phone configuration page is in CCMAdmin the
CUCM is not involved in this at all, unless it happens to be the TFTP
server.
-Ryan
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Steve G
Sent: Monday, November 03, 2008 4:42 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Peer Firmware Sharing
Group,
I can see the benefit to enabling Peer Firmware Sharing on existing WAN
locations for support of firmware upgrades and such. I am wondering if
there is any way to plug in a new phone and have it participate in peer
firmware sharing. Since the phone needs to be configured for this, it
looks like this would be useful in firmware upgrades to existing
deployments only and not a new site deployment.
Also, All I can find about configuring this feature is the setting on
the phone configuration page. Is there nothing that has to be done on
CUCM itself?
Thanks,
Steve
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081103/62977c65/attachment.html>
More information about the cisco-voip
mailing list